- Stock: In Stock
- Brand: Longer
- Model: L100-1F
- Weight: 2.40kg
Automatic identification of pump head and tubing, simplify the operation process and provide reliable guarantee for high-precision fluid transferring
7 inch color display, full touch screen and intuitive graphic interface, provide easy-to-use operations
Customize parameters by programming, and the parameter programs can be stored and easily recalled
Multiple function modules and intelligent algorithms are designed for a wide variety of applications, including routine and multi-step complex applications
Pump can be controlled through touch screen, foot switch, analog signal and communication commands, combined with a variety of interfaces (USB, RJ11, DB9 etc.) for easy system connection
CE certified
Automatic identification of pump head and tubing, simplify the operation process and provide reliable guarantee for high-precision fluid transferring
· Place the identification tag of pump head or tubing near the identification area on the handle of the pump drive, the system will automatically identify the model of the pump head or tubing.
· Prevent manual input errors, and provide reliable guarantee for high-precision fluid transferring
Note: automatic identification function is only available on L100-1FS, L300-1FS and L600-1FS.
Technical Specifications
Calibration：Improve the flow rate and dispensing volume accuracy.
Display：7Inch 1024*600 color LCD
Language：Chinese or English, set as needed
Control mode：Touch screen control, footswitch control, external signal control and communication control
Work mode：Programming
Programming function：Running control module: constant, ramp up/down, stepped up/down, sine, constant dispensing, ramp up/down dispensing.
Logic contol module: direction, delay, event trigger, status output, pause, jump, loop, stop
Configure multi-step program with multiple modules for complex application
External control：Start/stop control, direction control: voltage level signal or switch signal(dry contact)
Speed control: 0-5V, 0-10V, 4-20mA or 0-10kHz with uniform interface, max speed can be set.
Communication control：USB or RS485(RJ11) interface, Modbus protocol, multiple baud rate (1200/ 2400/ 4800/ 9600/ 19200/ 38400bps)
Status output：Output voltage level signals to indicate pump running status, direction status, and other custom status.
Parameter programs：7 parameter programs can be stored and easily recalled
Delayed start：Pump can start running at desired time
Back suction：Antidrip through setting back suction angle and delay time for high dispensing accuracy
Dispensing volume setting range：0.001uL-9999L
Interval time setting range：0.5s-9000s
Dispensing cycle setting range：1-99999(0 for unlimited)
Dispensing time setting range：0.5s-9000s (0s for continuous transfer without time limit)
Delay time setting range：0.5s-9000s
Prime：Fast filling and emptying at full speed
EMC：Comply with EMC Directive 2014/30/EU
Dimension (L*W*H)：294mm×180mm×235(mm)
Power supply：
L100-1FS-A/L300-1FS-A：AC220V±20%, 50Hz/60Hz;
L100-1FS-B/L300-1FS-B：AC110V±20%, 50Hz/60Hz;
L600-1FS：AC100V-240V，50Hz/60Hz
Operating temperature：0℃-40℃
Relative humidity：<80%
IP rating：IP31
Weight：5.0kg
Power Consumption：35W
Other parameters
